Shotgun Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
96 Posts
Hello - I am cleaning my Super X2 for the 1st time and it has a nasty stubborn burn ring on the magazine tube (see pic) that Hoppe's NO. 9 isn't working on. Do you have a safe recommendation to remove/clean it or should I leave it alone? Thanks much!
There's several methods . Do You have any fuel injection additive for your car around ?. Small rag in a strip large enough to wrap around burn ring soaked with the above . Berryman' Carb cleaner or parts dip , same procedure .
After soaking residue area remove rag , wipe with lacquer or acetone thinner on clean cloth .
Finish with a
Polish of with flitz metal polish, Simichrome or Mothers Mag polish or equivalent .
 

·
Registered
Joined
·
103 Posts
I use the same method as The Happy Kaboomer above recommends, and it
works perfectly; however, I recommend rubbing down with a bit of gun oil afterwards to help cut back the appearance of a burn ring.
 
1 - 5 of 5 Posts
Top