Carlson's tactical breachers choke?

I want one to put on my mossy JIC but it's not threaded for chokes

I'm going to send off my JIC barrel to get threaded.

xpdnc said:

have an identical choke on my charles daly. looks mean with it on but really just for looks.

looks like this.. (not my picture)

Click to expand...

Not really just for looks. This choke is made to shoot all loads. Slugs/00 buckshot/ steel shot loads/ all bird shot. Every thing you can get in 12ga. You can put it down the tube. When i called Carlson's they told me it was between a mod, choke and open choke. With 00buck you should get a pattern of about 2 inches at 25 feet and 8 inches at 50 yards, Plus the porting will help with muzzle rise and felt recoil by 50 %

My 870 came stock with one

My best friends mossberg 500 cruiser came with one on it.. As well as all the reasons listed above it is also made to dig into a door-jam and blow out the deadbolt or lock. I'm assuming with a heavy duty slug.

Ordered my choke, blackhawk spec-ops stock, and a Truglo TFO front sight.

Plus the porting will help with muzzle rise and felt recoil by 50 %

Click to expand...

Muzzle brake works well on a rifle but not on a shotgun. A shotgun shell doesn't generate enough pressure in the barrel like a rifle round does. You will notice very little if any difference in muzzle rise with a muzzle brake on a shotgun. None with felt recoil.

GC

blueblur said:

I want one to put on my mossy JIC but it's not threaded for chokes

Click to expand...

I'm sending mine off to Mike Orlean to get threraded. I want it just because I think it looks bada55.

charlie.45 said:

My best friends mossberg 500 cruiser came with one on it.. As well as all the reasons listed above it is also made to dig into a door-jam and blow out the deadbolt or lock. I'm assuming with a heavy duty slug.

Click to expand...

Actually, no--a breaching round is usually a specially made frangible load--often powdered lead or tungsten.

Slugs have a nasty tendency to either come back at you, or going through the door and killin' folks that don't necessarily need killin' on the other side of the door.

As for putting one on a shotgun...yeah, I suppose if you want something that is pretty much useless but looks all "bada$$ oparata taktikool" hanging off your shotgun, go for it.

Personally--I wouldn't put one of those useless pieces of dreck on my shotgun if you paid me to.

MAX100 said:

Muzzle brake works well on a rifle but not on a shotgun. A shotgun shell doesn't generate enough pressure in the barrel like a rifle round does. You will notice very little if any difference in muzzle rise with a muzzle brake on a shotgun. None with felt recoil.

GC

Click to expand...

I might have agreed with you before I tried a brake (a real one) on a saiga 12. What a difference. And also makes it MUCH louder. Like a sharp penetrating loud. WOW.
-Thomas

Choke just came in last night. Now to send it off for the install.

Nice!

Finally sent my barrel to Mike Orlean last week. $47 and 10 days later(6 from the time it got delivered to him) I got the barrel back looks great. Didn't take long considering he is 900 miles away. If I knew how to post pics here I would show you. Now I just have to mount the new sight.

gimmefuel said:

mine too

Click to expand...

I got the 870 Express Tactical (pictured above) a few months ago. The choke looks BA, but I took it off immediately and replace it with a different choke. I'm not bustin down doors, and I want the barrel length as short as I can legally go for a HD shotgun.

spyderman2k4 said:

I got the 870 Express Tactical (pictured above) a few months ago. The choke looks BA, but I took it off immediately and replace it with a different choke. I'm not bustin down doors, and I want the barrel length as short as I can legally go for a HD shotgun.

Click to expand...

I also have the same one pictured. What choke did you replace it with?

I like the choke it patterns buckshot well at 25yds in which is where I shoot it.