Shotgun Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
132 Posts
What is your GO TO hull for loading these ? Or do you just load what you can get?
As per MY particular setup 28 gauge 20 &12 I use STS and AA . My wads loads and patterns have proven to ME , it's the correct hull . Now I'm not opposed to reloading Federal or Fiocchi or near any other brand and have done so but I ALWAYS go back to the Nitro STS AA hulls and get consistently Longer reloading life out of them and pattern's don't seem to vary .
 

·
Registered
Joined
·
74 Posts
For 28ga I use AAHS hulls with a Claybuster wad. I have a lot of them and they get the job done.

I don't own a .410
 
  • Like
Reactions: oneounceload

·
Registered
Joined
·
466 Posts
AA HS in 410 and the ribbed Remington and AA in 28 gauge. I have also loaded a lot of 28 with the Federal hull, but only get about 4-5 loads out of them.
 

·
Registered
Joined
·
112 Posts
My preference for both Is the AA HS, but in .410 I also load quite a few Rem, and in 28 a friend gave be a few thousand Fiocche that I have been loading. They load nicely about 3 times then they are toast.
 
1 - 7 of 7 Posts
Top