Shotgun Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
So here is the problem.
Barrel selector is set to bottom barrel. I break open the action and only the bottom barrel ejects and cocks. Close action and only the bottom barrel fires.
Move selector switch to the top barrel, I break open the action and only the top barrel ejects and cocks. Close action and only the top barrel fires.
Only the selected barrel ejects, cocks and fires. They won’t both eject, cock and fire.
Any help would be appreciated.
Thanks Chad
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #2 ·
So after more research I realize now that the Citori Field shotguns have inertia driven trigger resets. I will remove the buttstock and give the internals a good cleaning. This is a recent used gun purchase so who know if it’s ever been taken down and thoroughly cleaned.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Have you fired live ammo or are you just dry firing?
No and that’s what I need to do in order for the inertia reset. I did tear it all down this morning and give it a good scrubbing. After getting it put back together now when it is broke open both barrels cock and both ejectors function properly. I think I’m good to go but will go out an fire off a few to verify. Thanks
 
1 - 5 of 5 Posts
Top