Remington Sear Spring - That works - Shotgun Forums

Shotgun

Remington Sear Spring - That works

This is a discussion on Remington Sear Spring - That works within the Sporting Clays forums, part of the Shotgun Shooters Forum category; If you're reading this... you have probably done the same thing I did... and been unhappy with the results. I have tried every spring offered ...



Go Back   Shotgun Forums > Shotgun Shooters Forum > Sporting Clays

Reply
 
LinkBack Thread Tools Display Modes
Old 06-25-2019, 09:12 PM   #1
Junior Member
 
Member #9442
Join Date: May 2017
Posts: 5
Remington Sear Spring - That works

If you're reading this... you have probably done the same thing I did... and been unhappy with the results. I have tried every spring offered by major suppliers Midw- MG- Brown- and on and on. Every one says they have a light pull spring. Most are only a pound or two lighter than the HEAVY 7lb factory spring. When they have 9 coils and the wire size is about the same... what can you expect.

A major trigger manufacturer sells a kit to replace sear & spring. But very costly if you have many to do. I had 11 shotguns to fix up. I wanted them to be the same.

Read about my solution at http://springs.ccskeet.com I guarantee you will be glad that you took the time to look.




Price $7.50 shipped USPS First Class to USA destinations only.

Last edited by dhenzler; 07-08-2019 at 01:45 PM.
dhenzler is offline   Reply With Quote
Remove Ads
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On